ESD PERSONNEL GROUNDING

Fabric Adjustable Wrist Strap Hypo Allergenic

Sky blue band
Fully adjustable
Available with a 4mm or 10mm stud
High quality conductive interior, made of stainless steel nylon filament
Outer side process with non-conductive nylon yarn
Plastic back plate prevents allergic reactions
Surface resistivity of 103Ω

Resistance from Band <105 Ohms Test Method EN 61340-55-1
Underside of Band <104 Ohms Test Method EN 61340-5-1
Top Side Of Band < 106 Ohms Test Method EN 61340-5-1

Fabric Adjustable Wrist Band Dual Wire

Black band
Fully adjustable
Available with 4mm stud
High quality conductive interior, made of stainless steel nylon filament lined with 10 rows of double ply silver coated nylon yarn
Outer side process with non-conductive nylon yarn
Surface resistivity of 103Ω
Termination: two pieces of small sized premium crochet band assembled to dual fabric buckle w/two male 4mm snap connectors
Plastic parts made of antistatic nylon material

Cleanroom Adjustable Wristband

Wristband with 10mm snap
Fully adjustable
Outer Surface : Plastic
Interior Surface : Conductive rubber
Lightweight, excellent for use in cleanroom environment
Recommended for use in Class 100
Particle Free – does not generate any particles whilst in use
Plastic material for easy cleaning
Built in 1 mega ohm resistor for user safety

Disposable Wristband

Copper foil : Conductive, size : 7.5cm (L) x 2.5cm (W) x 0.03 (T)
PE strap : Black, static dissipative, size: 150cm (L) x 1.0cm (W)
Resistance : 10e5
Polypropylene strap: White, non-conductive, size: 150cm (L) x 2.5cm (W)
Ideally suited for short term use, plant visitors and field engineers, shipping along with components and devices such as Memory upgrades
Individually bagged with instructions for use

Economy Wrist Strap Set

A comfortable, fully adjustable wristband incorporating a 10mm press stud. Supplied complete with a durable coiled earth lead, with either a 10mm press stud or a 4mm banana termination.

Press Studs & Tool

Earth grounding points on bench and floor mats are used to connect ground cords, these must be riveted through the mat material
The punch and anvil are simple but effective tools to achieve a neat finish with firm materials, no thicker than 4mm
Both tools are mild steel, with a bright zinc and passivate finish

Crocodile Clip

Stainless steel
Depth external 12mm
Length external 50mm
Width external 8mm

Coiled Earth Lead

Excellent quality for use with any kind of wrist band.
Strong connection between the cord and snap/banana plug/ring

Material :

Special conductive wire
Each coiled cord contains 10 strands
Outer covered with Non-Conductive PU
10mm snap to banana plug/crocodile clip
Diameter of cord: 2.4 mm
Diameter of coil cord: 1.02 cm
Resistivity : 1M Ohm +/- 10%

Coiled Earth Lead Dual Wire

Twin cable in 2.0mm (± 0.1mm)
Tinsel # 1/7 inner conductors
PU curly cord
PVC moulding
Spring loaded two female 4mm snaps with 1Meg Ohm resistor on each snap at one end, and monoplug at the other end
Use with 066-0036 Dual Wire Wrist Band’

4 Claw Snap Fastener

Prongs are designed to pierce bench mat
Prongs fold over on underside to mat to hold 10mm stud
Made of stainless steel

Heel Grounder

Velcro / Clip type
Double layered conductive cup (3.5mm x 230mm)
Each heel grounder incorporates a 1Mega Ohm safety resistor
All heel grounders are designed for use in conjunction with ESD flooring or mats
Recommended to be worn on both feet
Reusable and can be washed by hand in mild detergents
Clip type with snap release – easy to wear and take off
Hard wearing heel grounders designed for long term use

Disposable Heel Grounder

The disposable heel grounder is designed for plant visitors and other temporary workers who enter static controlled areas. It is made from antistatic fabrics and provides safe and effective resistance. The disposable heel grounder uses the conductive yarn in the antistatic fabric to create and maintain electrical contact between the ground and body and can optimise static dissipation.

Easy to Use / Comfortable to Wear
Economic Cost
Non-Marking
Surface Resistivity 105/sq

Toe Grounder – Non Adjustable

Fastening with stretch (elastic) back
Double layer conductive rubber cup (3.5mm x 19cm)
Outer conductive surface (black): 10^3 to 10^4 Ohms
Inner anti-static surface (ivory): 10^8 to 10^9 Ohms
Conductive tab (Grey): 10^3 to 10^4 Ohms
Each toe grounder with one built in 1Meg resistor

Toe Grounder – Adjustable

Fastening with stretch (elastic) back
Adjustable velcro to fit various shoe sizes
Double layer conductive rubber cup (3.5mm x 19cm)
Outer conductive surface (red): 10^3 to 10^4 Ohms
Inner anti-static surface (ivory): 10^8 to 10^9 Ohms
Conductive tab (Grey): 10^3 to 10^4 Ohms
Each toe grounder with one built in 1Meg resistor

Notes:
Recommended to be worn on both feet.
The toe grounder must be tested from time to time using a footwear test station (See page 44).

Sole Grounder

Velcro Type with D Ring for size adjustment
Double layers, conductive cup
3/4” Black velcro
2 pcs D-Ring
3/4” Elastic Strap

Open the buckle and velcro straps. Place the sole grounder on the bottom of the shoe. Close the toe strap by feeding the velcro through the plastic ring. Close the ankle strap. Place the ribbon inside the sock or shoe.

Earth Bonding Point

Features: Earthing point with 10mm stud

Portable Wrist Strap Tester

Portable instrument
Used for checking fitted wrist bands and cords
Fitted with a banana socket and 10mm stud
Requires a 9V battery

Wristband Tester 9V with Wall Mount and Footplate

Features: This wristband tester has been designed to measure both high and low fail and pass functions. It also has a low battery indicator to indicate battery replacement. Testing of your wristband is achieved by placing the jack plug into the socket and wearing the wristband – touch the touchplate and the status of the wristband will be shown.

Dual Line Constant Monitor

Features: This unique monitor has been designed to monitor your electrostatic protected area (EPA) in three zones, earth, mat, and wristband. It monitors a constant connection to ground, constant connection to your benchmat and a dual wristband and cord. If at any time the connections break an audible alarm will sound. The status of your EPA is clearly shown on the display panel indicating the fault that needs attention.

Single Line Constant Monitor

Features: This unique monitor has been designed to monitor your electrostatic protected area (EPA) in three zones, earth, mat and wristband. It monitors a constant connection to ground, constant connection to your benchmat and constant connection to your wristband and cord. If at any time the connections break an audible alarm will sound. The status of your EPA is clearly shown on the display panel indicating the fault that needs attention.

Constant Mat Monitor

Features: This unique monitor is dedicated to continually monitoring your electrostatic protected area (EPA). It monitors a constant connection to ground and a constant connection to your benchmat. If at any time the connections break an audible alarm will sound. The EPA status is clearly shown on the display panel and the zone which has been disconnected will be indicated. Reconnect and the pass indicator will show.

Footwear Tester

Features: This instrument has been developed to test footwear. The wall mounted instrument indicates left and right feet and will show the status of each foot by means of high and low indicators. To test footwear simply stand on the dual footplate and touch the touchplate. The instrument also has a low battery indicator.

Earth Bonding Plugs

Incorporates a 10mm male stud for connection grounding wire
Designed to fit UK and Euro standard mains plug outlets
Neutral and mains voltage pins are plastic, earth pin is metal

Earth Bonding Plug Shrouded Banana Socket & Stud

Incorporates 2 shrouded banana sockets and a 10mm male stud for connection grounding wire
Please note image is for illustration purposes only, this plug is designed to fit UK standard mains plug outlets

Earth Bonding Plugs

Earth Bonding Plug 1x10mm Stud with 1M Resistor
Features:

Incorporates a 10mm male stud for connection grounding wire
Designed to fit UK and Euro standard mains plug outlets
Neutral and mains voltage pins are plastic, earth pin is metal

Earth Bonding Plug Banana Socket & Stud

Incorporates 2 banana sockets and a 10mm male stud for connection grounding wire
Designed to fit UK and Euro standard mains plug outlets

Earth Bonding Plug 2x10mm Studs & M5 Post

Incorporates 2 x 10 mm Studs and 1 x M5 Post
Designed to fit UK and Euro standard mains plug outlets

Earth Bonding Plug 2xM5 Posts

Incorporates 2 x 10 mm Studs and 1 x M5 Post
Designed to fit UK and Euro standard mains plug outlets

Wpisz szukaną frazę